• Superior Friction Reduction – For lower tension and/or longer pulls.
  • Wets Out and Coats PE Jackets – Lubricates at all points of cable rub on long pulls.
  • Pourable – Can be poured into innerducts and feeder tubes.
  • Compatible with Cable Jackets – Avoid weakened or cracked cable jackets.
  • Slow Drying – Leaves a lubricious residue for lasting lubrication.
  • Pumpable – Pump available for easy, mess-free application.
  • Proven – Used over 20 years in installation of over 140,000 kilometers of fiber cable.
  • Available in Cold Weather Formula  – Polywater® WF can be used in cold weather pulling.
Visit Site

Polywater® F Lubricant is a high-performance, pourable liquid recommended for pulling underground fiber optic cable.  It is also suitable for pulling coaxial and copper-pair cable.

Polywater® F Lubricant wets and clings to cable jacket and evenly coats the jacket surface.  It continues to lubricate by leaving film after its water base has evaporated. It is compatible with a broad range of cable jackets, including polyethylene (PE) types.

Polywater® F Lubricant is a thick liquid, and is applied by pouring or pumping the lubricant into the duct system.

Product/Package Notes:

Polywater® F comes in two versions – a Regular version and a Winter version for cold weather use in temperatures as low as -20°F/-30°C.

The packages (with the exception of the drum) are all designed to allow the lubricant to be poured into upturned innerduct or a feeder tube.

olywater® F Fiber Optic Cable Pulling Lubricant
Catalog # Catalog #
Winter Grade
Package Description Units/Case
F-35 WF-35 1-quart/0.95-liter squeeze bottle 12
F-128 WF-128 1-gallon/3.8-liter jug 4
F-320 WF-320 2.5-gallon/9.6-liter pail 2
F-640 WF-640 5-gallon/18.9-liter pail 1
F-DRUM WF-DRUM 55-gallon/208-liter drum 1

Important Notice

The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater’s only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.